The old paneling in your home has turned too ugly to even bear and yet you cannot change it because of its very exorbitant cost. It gives you a feeling of depression and you have gone to the level of thinking of selling your home off just to get away from those irksome panels. Just do not feel down as you are not the only one facing this problem. There are millions of other people too who just hate the ugly look of the paneling in their home. There are a few tricks that can help you repair those panels and get rid of that horrendous look.
A few ideas are her for you to check, with the help of which you can readily brighten up the dingy walls and the ugly panels. Only be prepared to endure some elbow grease which is surely better than the ugly look of those panels.
Painting the Paneling: One way of giving them a professional look is to paint the panels. But you just cannot splash a tin-full of paint and expect it to look good. If you try that out it will give a bad look to the panels. Panels absorb the paints easily and this would show the panels again and might even leave some yellow streaks on the base. The key to a good painting is surface preparation. Just degrease the surface from dirt and muck with a good cleaner before painting it. A gloss-removing substance has to be applied before the degreasing solution is put on the panels. It should be then left to dry for a night. The panel is then absolutely ready to get painted. After the first coat of paint you should leave it to fry before applying the second coat.
Painting Wallpaper: There is a kind of wallpaper available in some wallpaper stores; those wallpapers can be painted again. This gives the look of a painted wall to the paper. You can choose a color and apply it on these wallpapers and it will look really great. The awfully dingy wood paneling gets a brand new look. Other colors can also be used to give a 3D effect to the whole thing. The wallpapers should be hung according to the direction. The paper has to be soaked in water prior to the painting and left to hang for a few minutes. This makes the paper ready to be painted with the color(s) of your choice. I did this to my own basement after replacing the windows.
Glazing the Paneling: By glazing the panel you can add a nice shine to it. The panel should be cleaned with a degreaser solution. Then the panel has to be colored according to your choice. It should be left overnight to get dried. Then you mix a satiny top shade with a glaze in correct proportion and paint over small sections of the panels. Determining how much shine you want, just wipe off the excess glaze with a clean sweep. The brush should be cleaned with mineral oil and let dry before storing them for future use.
Being specifically passionate about basement window, Johnathan Bakers was publishing a lot of detailed reports in this specific field. You can discover his writings on over at http://www.replacement-windows-tips.com
No comments:
Post a Comment