How to Make DIY a Solar Panel

If you are interested to know how you can make diy solar panels, you have arrived at the right place. Here we will discuss the preparation and material required for making diy solar panels. Once you make a diy solar panel, you can use them for converting solar energy to the electrical energy. These diy solar panels are essentially required for making a solar cell and therefore you should correctly make these panels so that highest efficiency of the final solar electricity generator is achieved.

First of all for getting the highest efficiency, you will need to select the right place and it can be either your backyard or your roof or garden. You will need to set these diy solar panels there and at such angle so that they get the maximum solar energy falling on roof or backyard. The smaller units are known photovoltaic cells and you will need to stack these cells one after another horizontally.

Although you will easily get diy solar panel in the market and if you want to make these for your residential use, you will have to purchase the following material from the market. These are easily available in electric stores and you can get all the items within $200.

1. Copper sheet
2. Two alligator copper clip leads
3. An electric stove
4. Wide mouth plastic or glass container
5. A multimeter for reading current in the range up to 15/20 microampere.
6. Accessories including scissors, sand paper, salt, water and sand paper.

You will need an easily available DIY (Do It Yourself) guide so that you can make diy solar panel from the material as mentioned above.

Earth4Energy is Such a guide. Once you go through earth4energy, you can easily assemble panels. Once your diy solar panels are ready, you will start getting solar energy of sun getting converted to electricity through these assemblies and thus will be saving huge amount per month, which would have otherwise been paid as electricity bill. Check out Earth4Energy Review